How To Preserve A Wood Carving

Clark the Carver typically adds a varnish as a layer of protection and shine to the piece.
How to preserve a wood carving. Once the second step is. The tarp will protect surrounding vegetation from spilled or splashed stain. Step 1 Spread a plastic tarp around the wood sculpture if its a tree stump or under it if it can be lifted.
It must be out of direct sunlight rain and weather. Work the creme into all parts of the carving with a bristle brush. 1-inch of thickness per year for the curing time.
Apply any finish you desire outside and under cover to allow it to dry thoroughly before bringing it back inside your living space. Keep your carving on an elevated surface to avoid excess moisture intake. The bleachwater ratio is 2 cups of bleach per every 1 gallon of water.
Slow and minimize this process by regularly treating the room where your carving is stored with a humidifier. To preserve a tree stump it needs to be cleaned sanded and filled with wood filler to prevent it from breaking down. Check always for any evidence of insect damage to avoid.
The draft is first sketched and handed over to a woodcarver who will then transfer the draft onto a piece of wood and carefully carve out the required design. Place the wood slice in a shaded area in your yard. A refrigerator or freezer can do the same.
Apply clear shoe creme to your carving to allow the wood grain to show through or use colored creme instead of paint. Soak the rinsed driftwood in a diluted bleach solution for 5 days changing the water daily. You can tell that the bark is dead if there is a black ring between the wood.