What Resin Do You Use For Wood Turning

I have used epoxy in boat building and wondered if the epoxy I used would be suitable for such work.

What resin do you use for wood turning. You can use the Envirotex Lite although it cures with a slight amber tint. A mold is formed and a piece of wood is placed in the mold and then covered up by epoxy resin which is sometimes colored or clear. Before long I started to buy resin pen blanks because of the amazing variety of colors that are available.

Mix the epoxy resin. The basic principle of wood stabilizing is to take a piece of soft or plunky wood and inject it with acrylic resin to create a stable hardened wood blank that is safe to turn. If you work carefully you can seal wooden surfaces with epoxy resin or simply fill gaps in the wood with the resin.

This video is about how to make pen blanks for beginners. Beautiful pieces are turned from such efforts but this involves a whole new skill set. Woodturning is the technique of turning and shaping a piece of wood due to the rotational movement of the lathe machine.

A few exaples are shown above It all started in northern California when I was taking a woodworking course at the David Marks school. It has a tendency to be more brittle than epoxy but this depends heavily on the agents the resin is combined with. Make sure you wear some kind of gloves latex is appropriate then combine the resin and hardener in the ratio described by the manufacturers If you added any colorants make sure that you adjust your ratio in line with the manual.

Various acrylic mixes are used for a lot of things from aquariums to visors and even as something that is used in implants and to replace bone. The most common compounds that are used to make acrylic are polymethyl methacrylate PMMA and polymethyl 2-methyl propenoate. Making products such as canes pipes honey dippers flutes chess pieces and kitchen utensils all kinds of bowls spindles lidded boxes sofa stands and other projects are the subjects of woodturning art.

Ive also seen examples of the use of coloured resin to fill voids. These are a form of clear plastic or more specifically thermoplastic. Orthophthalic resins are the most economical and widely used.