How To Use A Table Saw Safely

Measure twice cut once.

How to use a table saw safely. Ripping and crosscutting are covered as well as how to use the correct safety techniques. It is essential because the table saw is responsible for the majority of damages caused by power tools. Waste can shoot off the table unexpectedly.

If you do get sawdust in your eye then stop switch off the saw and wash out the eye. These parts should be properly adjusted before you turn on the table saw. You must know how to use a table saw safely to avoid any injuries.

Mount it and never cut through the material without it in place. Use the attached pushing handle or a pushing stick to push material towards the cutting board. Make sure that every part of your table saw is working efficiently.

Keep your working area clean. Dont return to use the saw until the situation is resolved and your vision is back to normal. Always read the table saw instruction manual before you use it for the 1 st time.

Visibility is of utmost importance. Most tables saw comes with a nut wrench for loosening the arbor nuts that hold your table saw blade firmly in place. Remember to position the rib blade while its teeth face the front side of the table saw since a typical saw blade spins top downward or simply towards you.

When setting up the table saw ensure that the ground is firm stable and level. How to Use a Table Saw 1. To do this use the arbor nut wrench that came with your table saw to loosen the arbor nut the nut that holds the blade in place and position the rip blade with the teeth facing the front of the.