How To Prepare Wooden Front Door For Painting

When any primer has dried rub the door down with fine sandpaper and then a clean cloth to remove any dust.
How to prepare wooden front door for painting. If youre painting onto a bare or repaired surface or over a darker colour a coat of primer is needed. Leave it to dry for four hours and apply to second coat. You need to prep the surface of your uPVC door before you paint it.
Take the door off its hinges using a screwdriver to push up on the pins. Start at the top left 1 and work down from left to right. Again once dry sand this layer down with fine.
First paint the mouldings around the glass 1 with a cutting-in brush. Then paint the outer-verticals 3 and finally all three exposed door edges 4. You can use a roller for this application.
Door painting tipsPaint Life Store. Next use a light sandpaper all over the surface of the door to create a key for the paint to stick to. How to Paint Start by applying the primer.
Apply the paint with a synthetic brush in the direction of the grain. This project can be done in one day. Next paint the cross-rails starting with the top rail and working down 2.
Blend each area into the next while the paint is wet finishing with vertical strokes in line with the grain. DIY Refinish Shutters Video Here. If you prefer to leave the door in place cover the handle and all hardware with 2-inch blue painters tape to avoid spatters.