How To Prepare Stained Wood Trim For Painting

Peak Pro Painting offers residential and commercial painting services to the greater Denver m.

How to prepare stained wood trim for painting. To ensure the surface of your wood is level use a putty knife to fill any holes or cracks with a spackling paste. If you are searching for a wood primer to paint any surface indooroutdoor with enhanced stickiness do not pass Zinsser produced stained wood primer. Peak Pro Painting here to tell you how to paint a stained door.

Stain-blocking primer is an exterior primer designed to prevent natural redwood and cedar oils from seeping to the surface. There are only a few items required to prep wood trim for painting. With this primer your white trim.

Vacuum up as much of the dust from sanding as possible. Then wipe down each surface with a tack cloth to ensure no dust was left behind. Wash Surface Wash the surface of the trim with a TSP solution or a low-phosphate household cleaner.

The primer integrates elements that help it produce extra. Use a stiff putty knife to scrape loose paint to the bare wood. Applying oil-based or shellac primer is a required step when painting over stained wood.

Dip an angled brush into the primer covering no more than ½ inch to 1 inch of the brush. Regardless of the religious factor involved in painting hardwood trim lololol if you must do it you need to buff sand the wood 150 or 220 is fine for this step. First clean the stained surface with soapy water to remove any dust dirt and cobwebs.

PRIME the trim with BINs Bullseye pigmented shellac. Next to dull the stain. The primer is formed following a unique formula that lets the users paint it on about any surface.