How To Prepare Chipped Woodwork For Painting
Treat any knots with two coats of knotting solution.
How to prepare chipped woodwork for painting. Sanding block or a small piece of timber to use as a DIY. Clean out any loose material and scrape off. Using a putty knife scoop out some Ready Patch and smooth it over the surface of the crater left by the chipped paint.
If your wooden surfaces are new and unpainted then start by making sure they are clean before inspecting them for any knots in the grain. In this tutorial our Wickes experts show you how to prepare interior woodwork for paintingSubscribe to the Wickes YouTube channel here. Exterior unfinished wood vs.
Tools needed to prepare interior woodwork for painting. Paint thinner on the other hand should not be used to clean metal to prepare it for painting. Make sure you use primer specifically designed for your wood project interior vs.
Dip an angled brush into the paint covering no more than ½ inch to 1 inch of the brush. If the wood is chipped gouged or otherwise damaged and you plan to paint you can make an easy invisible repair by using a two-part polyester resin compound. Hold the edge of the craft stick perpendicular to the trim and run it across the surface of the.
As a whole rubbing alcohol as well as a vinegar and water mixture can be used to clean metal before painting it. Paint thinner will leave some residue on the surface that will hinder paint adhesion. Work it in several directions to fill any nooks and crannies.
Step 2 Knotting solution will stop the resin in the wood from leaking into the paintwork. This will ensure all dust and any particles left behind from moving the furniture away from the walls will be collected. Also make sure to overfill the area a little so that when youre ready to sand you can sand it.
