How To Prep Wood For Stain After Sanding

Sanding is critical t.

How to prep wood for stain after sanding. Let the cleaner sit for 10 to 15-min. Dry rags or brushes arent the most effective tools for removing dust. Some experts recommend using water instead of conditioner to prepare the wood for staining for the same effect.

Then rinse the entire deck and let it dry. Allow the dampened wood to dry 30 minutes before the final sanding. You will need to use mineral spirits after sanding.

Lightly sand the deck with a drywall sanding pad and 150-grit sanding screen. Moisten a lint-free cloth and wipe down the wood. On certain woods such as oak and ash pre-wet the wood with a damp cloth to raise the grain before final sanding.

It takes four steps to sand wood to perfection. The mineral spirits will clean any grime or grease off of your surface making it ready for painting or staining. Since Water Based Pre-Stain Wood Conditioner causes the wood fibers to swell you will need to lightly sand the surface with a fine grade sandpaper 15-30 minutes after application.

Sand parallel with the grain only. Never sand across the grain. The most effective way to clean wood after sanding is to brush all the dust off the wooden surface using a painters dust brush and then wipe the surface with a lint-free rag and mineral spirits.

Wipe down your wood and remove any dust. Use a palm sander or a random orbital sander to quickly strip away imperfections and previous layers of stain to reveal the underlying natural wood. If you choose this method make sure you only use a wet rag to apply the water.