How To Prep Wood For Painting After Sanding

Pound-in any protruding nail heads.
How to prep wood for painting after sanding. If you dont wipe down the wood. Wipe down your wood and remove any dust. Use a scraper to remove loose paint from the siding working from every direction.
Before painting wood siding fill large holes and gouges with a two-part resin filler such as Minwax High Performance Wood Filler. Try to prime in the same direction and dont worry about brush strokes. When lightly wiped over wood surfaces it miraculously picks up dust that vacuuming and dry cloths cannot remove.
Pour the mineral spirits over the stripped area and use the steel wool to wipe away any remaining stripper residue be sure to follow the wood grain. You have to mix these setting types of fillers but they stick better to wood than other fillers. Once the patch is dry shaped and sanded prime it to protect it from moisture.
Wood dust from sanding will cause problems if its not removed from the surface before staining. After stripping paint to properly clean the wooden surface use mineral spirits and fine steel wool. After youve sanded the wood go over it with a rag to wipe it down and remove any excess material.
Wipe the folded tack cloth across the wood. The most effective way to clean wood after sanding is to brush all the dust off the wooden surface using a painters dust brush and then wipe the surface with a lint-free rag and mineral spirits. Dry rags or brushes arent the most effective tools for removing dust.
How to Prep Sand and Prime Furniture for Paint - YouTube. While you can use any cloth to do this a tack cloth will pick up the most dust. Prime your piece from top to bottom always looking a little behind for drips.