How To Prep Wood For Paint After Sanding

After this second sanding the wood is ready for a stain or clear protective finish to be applied.

How to prep wood for paint after sanding. Capturing dust Dust is the enemy of a smooth finish. If your project is for inside an oil-based primer will penetrate the wood best but if its. The primer also keeps any stains on the wood from coming through the paint.

Timing is critical when using a paint stripper. After stripping paint to properly clean the wooden surface use mineral spirits and fine steel wool. Allow the dampened wood to dry 30 minutes before the final sanding.

However you can use any deglosser for 15 minutes wipe the surface to prepare the surface for painting. The most effective way to clean wood after sanding is to brush all the dust off the wooden surface using a painters dust brush and then wipe the surface with a lint-free rag and mineral spirits. Then use a vacuum or blower to get rid of dust from tricky spots.

Wipe the surface of the wood with a damp cloth to remove any remaining dust and debris. This way you wont need sanding. Ensure you rinse the rag between passes which also serves to remove all debris left behind from the sanding process.

Apply primer to the surface of the wood second coat if still translucent Prime the surface of the wood using a paintbrush or roller depending on the surface areas size and the number of details in the piece. On certain woods such as oak and ash pre-wet the wood with a damp cloth to raise the grain before final sanding. In addition primer fills the pores in the wood and makes your painted surface look much more even.

There are only a few items required to prep wood trim for painting. Before sanding scrape loose and flaking paint from the siding. The mineral spirits will clean any grime or grease off of your surface making it ready for painting or staining.