How To Prep Wood After Sanding
Also the advantage of using mineral spirits when compared to water is that water swells wood also.
How to prep wood after sanding. If you plan on using an oil-based stain you must use the oil-based Minwax Pre-Stain Wood Conditioner. After they dry put the hardware in a cardboard box to spray. Using fine-grit wet and dry sandpaper to remove dust that stuck on the last coat.
Wipe down your wood and remove any dust. Sanding is critical t. Once youre done sanding make sure youve gotten rid of ALL the sanding dust before you do anything else.
The hand brush will get rid of rough pieces and bits. It is a great tool for cleaning a large portion. Hardware Prep If you are planning to paint your hardware dont forget to prep them too.
New coat prep you can sand after staining to rough the surface in preparation for applying a new coat. Soak your hardware in a good cleaner. The next step is the trick here.
Give them a good scrub using a sponge or cloth. Optional pre-wetting of the wood when using waterbased finishes. Once the wood has been sanded it should have an even surface with non-jagged or rough edges it will take on a lighter color appearance and often the grains of the wood will show more.
Also the brush fibers could clean dust from tricky holes or corners. Watch cabinetmaker Steve Maxwell explain the method he uses for prepping wood for a flawless finish. The most important part of finishing a piece of furniture happens before you open a can of stain or paint it starts with the sanding.
