How To Prep Stained Wood For Painting

Stain all of the surfaces of your project in one sitting.

How to prep stained wood for painting. When it comes to sanding stick with 150g 220g sand paper. In addition you can use a foam roller to cover wide surfaces brush for narrow or hard-to-reach surfaces. Use latex primer and paint when painting over a water-based wood stain.

Using a paint brush or a rag apply an even layer of stain on the woods surface. If the woods pores are open the stain. Many people ask if you can paint over stained wood without sanding.

You dont have to worry about being neat or applying stain in the direction of the grain. Preparing your bare wood surface correctly will allow your coating to penetrate and adhere properly. Dont rush things youll be fine.

To sand and prepare wood before staining first identify the type and grit of sandpaper to be used. The next step to preparing the stained wood is washing it. Paint the woodwork with an oil-based primer to seal the surfaces and prevent the stain.

All sanding should be performed in the direction of the wood grain. Sanding across the grain will create scratches that will absorb stain and polyurethane unevenly. After this use a clean rag and wipe off any stain thats pooling on the wood.

Adding a Clear Coat Varnish. Some DIY experts say its possible but we suggest sanding the wood for the best results. Paint adheres well over water-based stain so after completing the prep steps outlined above apply a.