How To Prep Exterior Wood Trim For Painting

Lightly sand it when it is fully dried.

How to prep exterior wood trim for painting. Preparing Exterior Trim for Painting Step-by-Step Start by scrubbing off all dirt and chalking paint with a scrub brush and a solution of trisodium phosphate TSP. Painting Wood Siding Photo 1. Improve touch-up performance of the.

A putty knife to scrape peeling paint and apply fillers a paint scraper for rough oil-based paint sandpaper or a sanding sponge to smooth out rough spots and dry spackling paste. If there are any areas of bare wood on your trim you must prime the surface before painting. Block stains marks and odors.

Last thing to do is remove any door furniture handles trim that sort of thing that you dont want painted or tape them up. Cut the tip smaller than you think you need. Sanding filler caulking edges where trim meets another substrate allowing to dry.

There are only a few items required to prep wood trim for painting. Sherwin-Williams primers are formulated to solve typical painting problems while helping to make your finish coat smooth and uniform. You want your exterior wood clean and flake-free before applying paint How to prep exterior wood for painting.

Achieve a smooth professional finish. Wash Surface Wash the surface of the trim with a TSP solution or a low-phosphate household cleaner. Remove extra caulk with a putty knife.

Rinse the trim thoroughly and allow it to dry completely before preparing the surface for primer and paint. Once primer has dried trim is ready repainting exterior trim. Sand rust from nail heads then set and caulk the nail holes.