How To Make Your Own Wood Turning Lathe

Building your own wood lathe is truly a simple matter.

How to make your own wood turning lathe. You can buy your own wood lathe or build your own. All you need is the desire to have one the gumption to do so and the intestinal fortitude to say I. For a wood lathe a 12 horsepower motor should be enough.

I will not go into excessive detail here because everyones motor setup will vary. Nut Type Compression Tube Size 34 In Tube Outside Dia. Woodturnings popularity is on the rise and for good reason.

You lathe should look like this. Mount the turning blank on the lathe. Considering that electric motors commonly come at 2400 or 2800 RPM as well as the cheaper low speed ones finding the right motor is part of the fun of creation.

In your tail stock put the live center. Fixtures and Chucks for Woodturning clearly explains how to get the most from commercial chucks centers and faceplates. You can get 30 minute epoxyyep just click on that link or check out your local big box store.

How to Make Lathe Chuck. Wood turning is fast becoming a popular hobby for woodworkers of all skill levels. Both my father and I have used vacuum cleaner motors to build both metal and wood turning lathes.

Make sure you clamp up the handles nice and tight wipe off any excess epoxy that oozes out from the handles being squeezed together. Old-school faceplate turning often involves gluing your turning stock here a piece of cherry to a sacrifical piece of wood in the photo a piece of pine that is in turn screwed to the faceplate. To begin with if your were searching for wood turning tools with carbide tips you might have a hard time finding them because these special tools are made with carbide inserts.