How To Make Wooden Drawer Pulls

I made a simple drill guide out of a scrap of hardwood.
How to make wooden drawer pulls. The block is a great fit for a drawer pull and it provides a pop of color. Cut the wood dowels down to 2 each. How to make 5 different styles of DIY Wooden Drawer Pulls.
Two washers screwed on to overhang the edge help to position this piece of wood. Next some sanding to make them perfectly smooth. Use some ScotchBlue Painters tape for better precision.
I just pushed them down with firm pressure and set them aside until the glue dried. Use small pieces of double-stick tape to adhere a pair of pulls to the tops of the platforms. You can make the first drawer pull with nothing but a sander.
Those are the standoffs and for the handle itself I cut pieces of spruce to 6 long. A slightly more elegant design than the ones I made earlier. First mark on the drawer where the holes will be drilled for the drawer pulls to ensure the pulls are installed evenly on each drawer.
After drilling the holes I cut out the insides of the handles with a bandsaw. Perfect for the basement or playroom these fun knobs take a cue from the classic toy LEGOs. Drilling through my guide for the holes.
Making some wooden drawer pulls out of ironwood for a workbench. Once the dowel has a block on each end lay it on a flat board so that your Easy DIY Wooden Drawer Pulls dry with the 2x2s flat and even with each other. Insert the carriage bolt into the hole for the drawer pull in the drawer front.