How To Clean Wood Table After Sanding

If you plan on using a water-based stain use Minwax Water Based Pre-Stain Wood Conditioner.
How to clean wood table after sanding. You can choose to use a painters brush or designated dust brush to clean wood after sanding. Brushing the dust off the surface of recently sanded wood is the first step to clean wood after sanding. The mineral spirits will clean any grime or grease off of your surface making it ready for painting or staining.
Clean sanded areas with the bleach solution after sanding and air dry the furniture. Use a fine grit 120 to 220 rating sandpaper to lightly sand the moldy areas. Apply the polyurethane finish lightly to the brush making sure to wipe off any extra.
Brush the sanded area off with a soft cloth to remove all traces of dirt and grit from the sanding. If not return to the sanding stage to get it right. Using a dust or Painters Brush.
Then switch to fine sandpaper 200 grit until the entire piece is uniform. Always see to it that you will be sanding along the wood grain. Sand down the brush marks lightly with the fine-grit sandpaper.
Wipe down the whole surface with a tack cloth to remove any dust from sanding. Lets now take a look at some alternative methods of cleaning wood after sanding. Step 2 Mist a lint-free cleaning rag with the spray.
Reapply the stain to reach the desired depth of color. Using denatured alcohol after sanding would work too. Let the stain soak into the wood for just a few minutes before wiping it off with a clean towel.