How To Clean Stripped Wood Before Painting

Be careful not to saturate your piece too much with liquid.
How to clean stripped wood before painting. Mix these two liquids together in equal proportions. Pour the mineral spirits over the stripped area and use the steel wool to wipe away any remaining stripper residue be sure to follow the wood grain. Add more stripper to soften up the finish again but only wait five minutes before trying to scrape.
Can you roll paint stripper. Work efficiently by starting with a coarse sandpaper in the 60-100 grit range and gradually switch to finer sandpapers rated closer to 150 grit. Use steel wool and either water or paint thinner depending on the stripper you have used and wipe down the piece entirely making sure all of the leftover stripping agent is removed.
Use a brush when painting old siding. Dont use paper towels as this will leave behind paper particles that may affect the staining of the wood in the future. The sanding will make the wood splotchy and uneven.
After stripping the wood do not sand it. Step 2 Mist a lint-free cleaning rag with the spray. It does not need to be rinsed off like many other cleaners do.
Dont let the primer sit more than a few weeks before painting. If you still have paint or varnish remaining on your wooden project you can repeat the stripping process and again use mineral spirits and steel wool to remove the remaining residue. Spray your rag and work your way down from the top to the bottom.
Brush spray or roll on the chemical stripping agent. If the unfinished wood was exposed more than 3 to 4 weeks lightly sand the surface to remove the thin layer of degraded wood before applying paint. When finished with all of your sanding carefully wipe down and vacuum up all traces of dust and debris before you introduce primer and paint into the picture.