How To Clean Bare Wood For Painting

The hand brush will get rid of rough pieces and bits.

How to clean bare wood for painting. Step 2 Mist a lint-free cleaning rag with the spray. Brush with the wood grain -- as if you were painting it -- to avoid creating visible dust streaks. It is the primary tool to clean the woodwork.

The wood surface should be prepared by sanding it cleaning it and applying a primer before painting the wood and the latex paint should be sealed with a topcoat to ensure the longevity of the paint job afterward. Previously painted wood etc. Erasing compounds are elements used to remove dirt from bare wood surfaces.

Latex paint can be used on wood without any issues. Clean the wood surface thoroughly. Sanding produces dust which may make it difficult for new paint to stick.

Wipe down the wood again thoroughly to dry off all the areas you cleaned. Fill a spray bottle with 2 cups water. To clean hardware we suggest using a 1 to 1 mixture of vinegar and water.

Dust unfinished wood with a paintbrush that hasnt been used for painting. Exterior unfinished wood vs. Apply a coat of Rustoleum oil-based paint to the primed wood using the cleaned paintbrush.

Allow the wood to dry for two hours and then apply an additional coat if you can see the primer showing through. Also the brush fibers could clean dust from tricky holes or corners. Simply apply a small amount of the erasing compound on the surface of the unfinished wood and use some cotton balls to work the cleaning material into the grain of the wood.