How To Build A Homemade Wood Lathe

How To Build A Wood Lathe The materials needed for this include woodblock metal rod screws drill wooden board and motor.

How to build a homemade wood lathe. For making a lathe first you need to cut plywood parts of the same size. Building your own power tools is a specialized skill but with the right planning and patience you can DIY everything in your workshop. Two headstock clampsmade from 34 X 5 12 X 7 hunks of plywoodhold that block to the bed on each side.

This was great fun and allowed me to make a few small turned wooden items. The best choice of the plywood sheet is 10-12mm and 17-21mm to make a lathe. A hand-drill provides the motor and the faceplate is simply a square of steel.

Now comes the wooden blocks. Secure a stock piece of wood to be turned onto the lathe base plate using 4 two-inch wood screws through the back of the lathe base plate on the end of the shaft through the 4. Attach one to one lathe leg and sandwich it with some scrap wood to act as braces first picture.

Cut the blocks in the same size. Heres how I made my first wood lathe from scratch at very little cost. Cut out 2 more 6 ½ x 3 34 boards of poplar witch will be used to extend each leg.

So if you are reading this you must be interested in building a homemade lathe. The bearing mandrel bolts directly into the surface of the headstock. Cut more pieces of scrap wood to brace between the two legs making a little box last picture.

Then do the same thing to the other leg that was just cut out. Choose a size between 33-36 inches length for two blocks and 6-9 inches length for two more blocks. Homemade Wood Lathe - 3 in 1 Powered By Drill Machine.