How Do You Prepare Wood Paneling For Painting

You would not paint brick the same way you would paint wood and we are going to give you some pointers to help you make your wood paneling painting look as good as possible.

How do you prepare wood paneling for painting. Regardless of whether your wood paneling is stained and varnished or if it has a glossy veneer begin this project by dulling the surface. A damp rag will get rid of most of the dust dirt and cobwebs. First you have to decide if you really want to paint over your wood paneling.

If desired lightly sand all of the paneling along with trim and moldings with 150-grit sandpaper. Before attempting to do anything with your wood paneling be sure to clean it. Once you Prime and paint there is no going back.

Apply two thin coats of stain-blocking primer. Clean the wall paneling with diluted TSP. Wood paneling can make your home look dated and cramped but replacing it is an extensive project that isnt always a viable option.

Apply the torn wet paper in an overlapping. The only other option after that would be replacing it sheet-rocking over it and so on. Do this only with water and little liquid soap.

Same with painting over wood paneling preparation is a key to good vinyl paint finishesYou can clean the surface the usual way. Prepare the Paneling Wear safety glasses and older clothing in case of paint splattering. Sand the paneling lightly with sandpaper in the 180- to 220-grit range.

Fill and Sand the Wood Apply wood putty with a putty knife to fill any holes or cracks and allow to dry. Ready your work area. Between prep Prime and paint it this is a project that can easily be done in a day for your average sized room 10x20.